-
-
ProductsFiber end-face cleaning product series, fiber inspection product series, fiber optic network tool series, network data testing product series, 5G/network maintenance product series
-
-
TQ-5016A Handheld Intelligent Integrated Tester for Government and Enterprise Leased Lines
Keywords:
Category:
Product Features
The TQ-5015A is a portable intelligent test instrument for large customer dedicated lines, launched to meet the needs of current operator's full-network operation. It possesses strong comprehensive capabilities for solving on-site maintenance and testing of multi-service interface applications and can flexibly adapt to other business needs.
Product Features
A. Wide Range of Hardware Testing
10/100/1000M Gigabit optical/electrical ports, OTDR, E1, GPON, optical power, red light source, HDMI, full-network SIM card, GPS positioning, NFC, Bluetooth, and other interfaces and related testing functions.
B. Wide Range of Software Applications
Full Chinese operating interface, supports operator work order processing, supports wireless mobile internet access, supports saving results handwritten notes prototype, supports remote control operation, supports cloud upgrade service function.
C. Other Features
The product uses an ultra-high-definition 5.5-inch capacitive screen with a full Chinese operating interface. It is simple to use and easy to carry, allowing engineering and maintenance personnel to perform on-site engineering installation, debugging, and maintenance, saving a significant amount of time and cost.
Test Function List
| |
Optical Port Support 850nm/1300nm/1310nm/1550nm | High Line Rate IP Ping Test |
Provides RFC2544 (Throughput, Delay, Packet Loss Rate, Back-to-Back) Functional Test | APR Scan |
Connectivity Test | Trace Route |
| |
| |
Support BERT Bit Error Rate Test ( G.821、G.826、M2100/550 ) | Maintain Link PING Test and Loopback PING Test |
Support PCM-30/C 、PCM-31/C Non-Frame Structure | Automatically detect the remote router's IP Address |
Support HDLC/PPP/ Frame Relay Protocol Test |
|
| |
| |
PON ONU Simulation test and fault location | ONU Optical Power |
LOID Status | Broadband Internet Dial-up Verification |
ONU Link Operating Status | Network Packet Sending / Packet Receiving Statistics |
| |
| |
Test Wavelength: 1550nm | Event Dead Zone: <2 m |
Test Kilometer: 0.03-100km | Attenuation Dead Zone: <15 m |
Dynamic Range: 26dBm | Test Accuracy: ± 1 m |
|
|
| |
Test Wavelength: 850nm/1300nm/1310nm/1550nm/1625nm | Detector Type: InGaAs |
Supported Interfaces: FC/SC/ST | Accuracy: ± 0.01dB |
Test Range: +10~ -70dBm |
|
| |
| |
Operating Wavelength ( nm ): 650 LD | Test Distance: Greater than 8km |
Interface Type: 2.5mm Universal Connector | Modulation Mode: CW/1Hz/2Hz |
Input Power: >5mw |
|
| |
| |
Camera Photo | HDMI Input |
ID Card Scan | Two-dimensional code scan |
Product Specifications
| Product Performance Parameters | |
| Test Port | E1 Interface: E1 link, compliant with G.703(E1) test function (75/120 ohms) |
| Ethernet Interface: 10/100/1000M dual-mode fiber/electrical Gigabit Ethernet ports | |
| Optical Power Meter Interface | |
| OTDR Interface | |
| Display | High-resolution 5.5-inch color LCD display screen, resolution: 1920X1080 |
| Storage | Can store and query 1000 test results, supports printing |
| Battery Capacity | 4000mAh, 3.7V smart lithium battery |
| Operating Time | Approximately 5 hours (laboratory data, may vary depending on application scenario and usage conditions) |
| Charging Time | Approximately 3 hours |
| Charger Specifications | 5V@3A, AC100~240V, 50-60Hz |
| Operating Temperature | 0℃~50℃ |
| Storage Temperature | -20℃~+70℃ |
| Operating Humidity | 5%～90% (non-condensing) |
| Product Dimensions | 200X95X50 mm |
| Product Weight | 1 Kg |
Contact technical or sales person for consultation.
Consulting hotline:
After receiving your message and information, our sales or technical personnel will contact you.
Your information will be kept confidential;
Some products can be customized according to your needs.
Related Products
View more solutions
The cleanliness of the fiber optic end face directly affects the quality of optical signal transmission. Pollutants such as dust, oil, and water vapor can cause signal attenuation, increased reflection, and even signal interruption. Regularly cleaning and maintaining the fiber optic end face is crucial for ensuring the stable operation of the fiber optic communication system.
In the digital age, optical network equipment, as a key infrastructure for information transmission, plays a vital role in ensuring the smooth operation of various services. A complete and efficient detection and maintenance scheme can promptly identify and resolve potential equipment issues, improving network performance and reducing the risk of failures.
Ensure the continuous and stable operation of government and enterprise operation/5G network operation equipment, providing high-quality 5G network services to government and enterprise customers and guaranteeing the normal operation of various businesses. Through scientific and standardized maintenance management, reduce equipment failure rates, improve network performance and reliability, and promptly respond to and resolve problems encountered during equipment operation.
Shenzhen TORCH Telecom Technology Co., Ltd
Tel：+86-755-83745302
Email：oversea-sales@tongqitelecom.com
Address：RM301, 3F, BLDG3, Antongda Science and Technology Park, Xin'an Street, Bao'an District, 518100, Shenzhen